Resin Systems Engineered
To Meet Today's Flooring Challenges
Granitex
Color-Chip System I
Multi-colored
vinyl chips embedded in pigmented epoxy and sealed with a single
coat of clear finish. Chips give the look of terrazzo, granite
or hard surface carpet. Special combination of polymers allows
for a 2-day application. Finished flooring gives a beautiful multi-colored
appearance.
"Orange
Peel" texture provides slip-resistance. Commercial uses include
classrooms, offices, store fronts, cafeterias, clean rooms and
bathrooms. Residentially, the product is ideal for garage floors,
recreation rooms and kitchens.
Product
Description
APF Epoxy
550 - A modified Bisphenol A epoxy resin crosslinked
with aliphatic amines. Epoxy 550 is formulated with high pigment
loading for excellent substrate hide in a one coat application.
This material is formulated with low odor glycol ether solvents
that are considerably less hazardous than conventional aromatic
or ketone solvents. Must be applied at 150 - 250 sq. ft. per
gallon over profiled concrete to obtain adequate substrate hide.
Solids Content
by Weight: 81.5%
Recoat Time: 10
hours
APF Polyurea
5000 - A two component hydroxyl functional polyaspartic
and amine crosslinked with aliphatic isocyanate. Polyurea 5000
is a low viscosity, easy to handle product that gives very high
gloss finishes that are both hard and abrasion resistant. Unlike
conventional polyurea materials, Polyurea 5000 has enough work
time to be applied by brush and roller. Applications that required
two or more top coats can now be done in a single application
resulting in savings of both time and labor. Ideally suited for
use as a finish coat in color chip and color quartz flooring,
automotive repair facilities, aircraft hangars, clean rooms and
various types of decorative architectural concrete applications.
Solids Content
by Weight: 100%
Light Traffic 12 hours. Vehicle Traffic 5 days. Full Chemical Resistance 7
days.
Double
Broadcast System I
Aggregate-filled
epoxy flooring is a combination of low viscosity, 100% solids epoxy
resin and different types of aggregate filler. These materials
form a seamless, monolithic flooring system suitable for many heavy
use areas. Broadcast aggregate is usually 20-30 mesh silica, Monterey
type sand or decorative color quartz. Double broadcast floors usually
achieve a somewhat more uniform appearance and are the floors of
choice for commercial applications where aesthetics is an important
consideration. Surface texture can be varied from aggresively slip-resistant
for wet areas such as showers and food preparation areas to an "orange
peel" moppable texture suitable for offices, hallways or laboratories.
Product Description
APF Epoxy
400 - A low viscosity, 100% solids resin system. Modified
Bisphenol A epoxy resin crosslinked with aliphatic and cycloaliphatic
polyamines. This material cures blush-free and provides an outstanding
balance of physical strength, flexibility and chemical resistance.
Epoxy 400 has considerably lower viscosity than most competitive
products providing improved handling at cooler temperatures and
the lower viscosity allows for the addition of silica fillers
for easy application of "slurry" type floors.
Solids Content:
100%
Cure Time: Dry
to Touch 6 hours. Light Traffic 16 hours. Full Cure 7 days.
APF Polyurethane
100 - A two component saturated polyester crosslinked
with aliphatic polyisocyanate. This product offers a remarkable
combination of performance properties not found in other polymer
coatings. Polyurethane 100 produces protective films which are
hard, flexible and very impact resistant.
Solids Content
by Weight: Pigmented 73.5%
Recoat Time: 10-12 hours. Light Traffic 24 hours. Full Cure 7 days.
Color charts coming soon.
Call
us today toll-free.
North Texas: 1 866-854-8881
Central Texas: 1 877-295-8881
South East Texas: 1 877-460-8884
|
