ACRYLIC SEALERS

DCS Clear Seal is a 100% acrylic solvent-based concrete sealer.  It has been specifically formulated for sealing and protecting plain and colored concrete, masonry, pre-cast concrete and cementitious overlayments.  Recommended for use over stamped concrete, stamped overlays, stained floors and any other concrete or mason surface where a clear bright finish is desired.  Clear Seal is a non-styrenated acrylic sealer, non-yellowing and resistant to oil, grease, acid, deicing salts, ultra violet rays, wet and dry abrasion, and most household chemicals.   it contains unique resins and solvent formulations designed for maximum penetration into the concrete pore providing great adhesion to the surface.  It enhances the color of stamped concrete, overlays, stained floors, and adds life to your decorative concrete surface, while creating a hard and long-lasting protective shield over the surface.  Clear Seal is a ready-to-use product.  It should not be diluted with xylene, toluene or any solvent.  

DCS Stain Sealer is a 100% acrylic solvent-based pigmented concrete sealer.  It has been specifically formulated for sealing and protecting plain and colored concrete, masonry, pre-cast concrete and cementitious overlayments.  Stain Sealer has all the great characteristics of the Clear Seal, but is pigmented to create a solid color, painted-look.

DCStain is a non-yellowing, an all-in-one stain and sealer.  It contains unique resins and solvent formulations (just like the Clear Seal) designed for maximum penetration and great adhesion to the concrete surface.  It gives you the same look as an acid stain and sealer combination, but in one application.  There are 6 available colors.

DCSeal is a solvent-based acrylic cure and seal designed for exterior concrete surfaces such as stamped concrete, exposed aggregate and colored concrete.  This is a non-yellowing sealer with a UV-additive.  DCSeal enhances color and gives a high gloss.

DCStone is a fast-drying silicone/siloxane sealer for use on concrete, masonry and stone substrates.  It penetrates into the substrate and forms a breathable moisture barrier that will let moisture vapor out, but will repel water and protect the substrate.  DCStone leaves the surface with a natural look and zero color enhancement or shine.

*See PRODUCT LITERATURE page for product data sheets.

Surface Shine is a solvent-based acrylic cure and seal designed specifically for exterior surfaces such as exposed aggregate, brick, stone and other concrete surfaces.  This non-yellowing sealer enhances color and give a high shine.

Aqua Shine is a water-based methacrylate cure and sealer developed for interior and exterior masonry, brick, stone and other concrete surfaces.  This non-yellowing sealer gives the surface a wetlook, satin sheen.

Click link to contact us

Mon - Fri: 7:30am - 5:00pm

Saturday: 8:00am - 12:00pm

  • Facebook Social Icon
  • Twitter Social Icon
  • Pinterest Social Icon
  • Instagram Social Icon

© 2018 by Decorative Concrete Supply, Inc.  Proudly created with Wix.com - www.DecorativeCS.com